The Electrician C combines knowledge of mechanical technology with knowledge of
electrical and electronic circuits to install, repair and maintain electrical systems,
apparatus, and electrical and electronic components of machinery and equipment.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties
may be assigned.
• Install, set-up, maintain, modify and repair all electrical distribution systems and
associated electrical equipment.
• Remain in compliance with current National Electric Code.
• Inspect and test components of electrical systems, including transformers,
transfer switches and switch gears.
• Install, operate, maintain, test and troubleshoot all types of electrical utilities and
production equipment including lubrication and periodic servicing.
• Run computer cables, connect computer jacks and plugs and test for adequate
operations.
• Connect power supply wires to machines and equipment, and connect cables
and wires between machines and equipment, following instructions from
manuals, schematic diagrams and blueprints requiring the use of hand tools and
test equipment.
• Detect malfunctioning apparatus, such as transformers, motors and lighting
fixtures using test equipment, and replace damaged or broken wires and cables
using hand tools.
• Replace faulty electrical components of machine such as relays, switches and
motors and positions sensing devices, using hand tools. Replace electric motor
bearings and rewire motors
• Diagnose and repair or replace faulty electronic components such as printed
circuit boards using electronic test equipment and hand tools.
• Possess and use knowledge of plant electrical distribution system and power
requirements.
• Utilize blueprints, wiring diagrams and manufacturer’s installation manuals to
complete assigned projects.
• Install power supply wiring and conduit for newly installed machines and
equipment, such as robots, conveyor and programmable controllers, adhering to
electrical code and blueprints.
• May plan layout of wiring and install wiring, conduit and electrical apparatus in
buildings.
• May diagnose and replace faulty mechanical, hydraulic and pneumatic
components of machines and equipment.
• Perform other duties as assigned.
The above, prescribed duties are set forth as “benchmarks” for evaluation of this
job. They are representative of the normal work performed and do not constitute
the complete requirements of the job
SUPERVISORY RESPONSIBILITIES
This position has no supervisory responsibilities. Works within Company guidelines and
policies.
Qualifications
QUALIFICATIONS
The duties and responsibilities listed above are representative of the required
knowledge, skill and/or ability to perform this position successfully.
EDUCATION and/or EXPERIENCE
High School Diplomas or recognized equivalent. Four (4) years of electrical experience
with some mechanical experience and a strong knowledge of electrical codes. May be
required to hold an electrician’s license.
COMPUTER SKILLS
Some computer skills preferred, MS Office and knowledge of programmable controls
LANGUAGE SKILLS
Ability to read manuals, schematic diagrams and blueprints pertaining to electrical
components and equipment. Ability to read and follow technical instructions, safety
rules, operating and maintenance instructions, policy and procedures and ability to write
routine reports and correspondence.
PHYSICAL DEMANDS
• Adequate sight, hearing and use of limbs to safely operate all powered vehicles
as needed.
• Sight capabilities to distinguish proper products identification as well as warning
indicators.
• Hearing capabilities to distinguish differences in warning alarm indicators and
standard operation indicators.
• Sight capabilities to identify accuracy and neatness of required job assignments.
• Stooping, kneeling, crouching, crawling capabilities to handle job requirements.
• Balancing to maintain body equilibrium to prevent falling when walking, standing
or crouching in all areas to inspect products and raw materials.
• Ability to verbally communicate either face to face or via telephone with other
fellow employees to accomplish all assigned job requirements.
• Hear and understand all verbal communication whether it be face to face or via
telephone.
• See and understand all written communication.
• Climb and descend all ladders or steps whether fixed or portable on company
facilities to inspect pipe and raw materials.
• Walking through, under and around equipment with a clearance of 30".
• Ability to grasp tools (manual as well as powered) and use them in accordance
with a safe working manner so as not to injure yourself or fellow employees. (i.e.,
power saws, drills, hammers, presses, latches, etc.)
• Sight capability to safely operate at arm’s length machinery and power and or
hand tools needed to accomplish the requirement of the job assignments for this
position.
WORK ENVIRONMENT
• Inside and outside environments apply.
• Subject to extreme cold, temperatures below 32 degrees for period of more than
one hour.
• Subject to extreme heat, temperatures above 100 degrees for periods of more
than one hour.
• Subject to noise, causing reason to shout to be heard above the noise level.
• Subject to vibration, exposure fluctuating movements of the body.
• Subject to hazards such as moving machinery, electrical currents, falling debris,
exposure to chemicals, gasses, high heat, or explosives. Subject to unregulated
atmospheric conditions caused by odors, fumes, gases, poor ventilation, and
dusts. Subject to oils and other cutting fluids
